W 130M

The W130M is a compact 6-wheel multipurpose machine that can be used as a clam bunk skidder, crane, pulley and forwarder (up to 5-meter logs). The W130M can be equipped with the new SIB drive for seamless distribution.

Engine

• Volvo Penta 4-cylinder Motor, water-cooled
• 140 kW (190 DIN PS) at 1,700-2,100 RPM
• torque max. 840 Nm at 1,200-1,500 RPM
• emissions stage EU V, with SCR catalytic converter and particel filter
• displacement 5130 ccm
• electronically controlled ventilator drive/Cleanfix as an option
• fuel tank capacity approx. 250 litre
• AdBlue^® tank 25 litre

Working Hydraulics

• load-sensing hydraulic system
• regulating pump with max. 280 l/min at 2,100 RPM
• biodegradable hydraulic oil, 290 l

Power Transmission – SIB

• hydrostatic power unit with 2-gear Transmission, which can be switched when driving (SIB)
• planetary axles with multi-disc brakes running in oil bath, for W130M: Rear axle tandem axle
• front and rear 100% separated switchable differential locks
• dual-circuit braking system, spring-controlled parking Brakes
• three drive mode stages which can be switched when driving
• crawler gear, driving with fixed speed, driving with reduced speed

Speed

• 1st gear  0 – 13 km/h
• 2nd gear 0 – 34 km/h

Electric System

• system voltage 24 V
• battery power 2 x 95 Ah
• alternator 110 A

Steering

• articulated steering, steering movement +/- 46°

Cab

• panoramic tilting cab
• ROPS, FOPS, OPS and OECD tested
• 2 complete entry and exit access ways for your safety
• unobstructed 3-part angled Lexan-MARGARD rear windscreen in the rear hazard area with panoramic screen
• opening side window
• extremely quit comfort cab
• all-round LED lighting (10 off)
• swivel seat which can be rotated mechanically or electronically
• air-conditioning
• colour touch-display with setting options for several drivers
• radio with USB and Bluetooth hands-free device
• classy and practical appearace
• 12/24 V sockets
• 2 convex interior mirrors
• steering wheel which is height and angle adjustable and can be folded down

Tires

• example: 28L-26 Nokian Logger King in front and rear

Frame

• front frame in stable box profile with integrated oil and fuel tank
• rear frame in trough design
• stable central joint with tapered roller bearings
• torsion on the frame supported by strong slewing ring +/- 22°
• torsion block through hydraulic cylinder, automatically and manually switchable
• all floor pans are hinged or can be unscrewed for maintenance work

Crane

• Epsolin, Loglift and others

Forestry Accessories

• HZM 14 double-drum winch with up to 14 t total pulling force (may also be set higher)
• alternatively, HZM 15 double-drum winch with up to 16 t total pulling force (may also be set higher
• height-adjustable rear plate with tilt lock
• height-adjustable pulley carrier with two rope pulleys